THERMAL COVERING FILMS

AGRISOL®

Agrisol® is a diffuse light thermal film obtained with the use of EVA, special polymer resins and mineral charges that is widely used to cover all types of crops especially in temperate climatic areas. Thanks to the high values of brightness, light diffusion and IR barrier, inbound and outbound, Agrisol® is used widely and with excellent results in the roofing of greenhouses intended for the production of red fruits.

Thanks to Agrisol® it is easy to get effective control of the conditions of brightness and thermality in the greenhouse in all seasons and on any crop. The mechanical characteristics of Agrisol® are truly exceptional. The stabilization and resins used ensure durations on average greater than those of common polyethylene films.

Agrisol® can be treated with Antigoccia and can be produced in four versions: Annual (EN 13206 – Class B), Lungavita (EN 13206 – Class D), Lungavita Plus (EN 13206 – Class E) and Lungavita Star Plus (EN 13206 – Class F).

AGRISOL_fondoAGRISOL_profilo

TECHNICAL DATA

Spessore nominale/ Thickness micron 200
Larghezza/ Width mt. varie/various
PROPRIETÀ UNITÀ VALORE
Property Unit Value
CARATTERISTICHE DIMENSIONALI / DIMENSIONAL PROPERTIES
Tolleranza sullo spessore nominale/nominal thickness tolerance:
- spessore medio/ average thickness μ ±5%
- spessore punto per punto/ point to point thickness μ ±15%
Tolleranza sulla larghezza nominale/ Width tolerance mm 0% +2%
CARATTERISTICHE MECCANICHE / MECHANICAL PROPERTIES
Carico di rottura / Tensile strength at break MD+TD N / mm² ≥ 20
Allungamento a rottura / Elongation at break MD+TD % ≥ 550
Resistenza alla lacerazione(Elmendorf)/ Tear resistance N ≥ 20
Resistenza all'urto:/Dart drop test zona piatta zone flat gr. ≥ 550
zona piega zone fold gr. ≥ 380
CARATTERISTICHE OTTICHE E TERMICHE / THERMAL AND OPTICAL PROPERTIES
Trasmittanza luminosa totale/ Total visible light emission % ≥ 85
Luce diffusa % ≥ 55
Barriera IR 7,5/12,5 micron(effetto serra)/ greenhouse effect % ≥ 88
ALTRE CARATTERISTICHE / OTHER PROPERTIES
Allungamento a rottura dopo esposizione % ≥ 50%
Elongation at break after exposition
DURATA / DURATION
Classe del film / Class of film E
Durata ( ore ) / Duration ( hours ) ore/hours ≥ 8500
N.B. I dati riportati nella presente tabella sono riferiti al film prima del suo utilizzo. I tempi di vita previsti, possono essere negativamente influenzati da una non corretta posa in opera e/o dall'utilizzo di fitofarmaci e pesticidi contenenti alogeni e/o metalli pesanti (quali ad esempio zolfo, cloro, bromo, rame, zinco, ferro, etc). A questo proposito vi invitiamo a leggere attentamente le Avvertenze per un corretto impiego in agricoltura dei film in LDPE-EVA-LLDPE-POLIAMMIDE .
Attention. The data are referred to the film tested before the use. The lifetime expected can be negatively affected by an uncorrect cladding operation and/or use of pesticides containing halogen -based compounds and/or heavy metals(as sulphur, chlorine, bromine, copper, zinc, iron, etc). In this respect we advise you to carefully read our instructions for a correct use of LDPE-EVA-LLDPE-POLIAMMIDE films.
The values shown in the previous table refer to the film in the duration class specified in it. The film is available in duration classes A, B, C, D and E. For more information, contact our offices.

COMPARE SIMILAR ITEMS